Hughes 9502 One Piece Terminal Kit

The Hughes 9502 one piece BGAN M2M Terminal Kit is a 9502 modem integrated with a compact antenna to create a single-piece, rugged terminal capable of withstanding the harshest weather conditions and extreme temperatures. This device provides stable, high-speed IP connectivity based on the Inmarsat Broadband Global Area Network (BGAN) which is ideal for SCADA and unattended sites intended and equipped for M2M (machine-to-machine) applications. This involves environmental monitoring and/or control, well site automation, surveillance and so on. 

This device runs on incredibly low power consumption when idle (<1 W) which makes it possible to provide end-to-end IP connectivity for remote sites off the communication/electric grid. This innovative device enables end-to-end IP connectivity for power-challenged locations that may rely on solar-battery arrays involving sensitive power budgets. 

Remote locations that rely on solar battery arrays, or other stored-energy solutions to remain in operation need efficient, low-power devices that help conserve energy over the long-term. The low power consumption of the Hughes 9502 makes it ideal for sites that are remote, off-the-grid, or power-challenged. Drawing less than 1 watt in idle mode, less than 20 watts sending and less than 3 watts receiving makes the Hughes 9502 the right solution for sites with sensitive power budgets, enabling the Hughes 9502 to provide end-to-end IP connectivity for even the most remote, power-challenged locations. 

Rated IP66 for ingress protection, the 9502 One-piece BGAN terminal is at the top of the industry scale. With a 66 rating, the unit is fully-sealed against particles and dust, and able to operate for long-term deployments in regions subject to wind-borne particulates or dust-storms. It also means that the single-piece construction with integrated antenna is highly-resistant to wet-weather of all kinds, able to withstand high-powered jets of water from every direction. Properly secured using the optional mount, the Hughes 9502 One-piece has a wind-survival speed of 161 kph (100 mph). Its an all-climate, all-weather terminal, with an operational temperature range that goes from sub-freezing to extreme heat: -40° to +75° C (-40° to +176° F). With these operational parameters, you can deploy the Hughes 9502 One-piece anywhere the INMARSAT system of communication satellites reaches, and be confident that your systems will be in contact and connected even in extreme conditions. 

• No minimum connection charge 

• Minimum billing increment of 1 Kbyte 

• No usage charge for over-the-air modem software upgrades 

• Integrated IP Watchdog to ensure "always-on" network connectivity. No manual intervention required to recover from an outage 

• Auto-on/auto-context activation automatically restores power and PDP connection to itself following loss of power and/or IP connection 

• Remote control via SMS provides management platform for command and control to the terminal using SMS, including configuration, debugging, and remote access to Web interface 

• Ultra-low power consumption 

  • Idle: < 1W 

  • Transmit; < 20W 

  • Receive: < 3W 

• Relay mode passes WAN IP address to the RTU 

• Security enhancements with extended layers of embedded security options 

• Basic installation; no PC required 

• Built-in GPS receiver 

• The Hughes M2M terminal is BGAN M2M Certified 

• Interfaces 

  • Ethernet connection (RJ45) 

  • USB Type B for connection to PC for configuration of terminal 

  • RS-232 (DB9) to external NMEA 0183-based GNSS device (e.g., GLONASS receiver) 

• Package Contents 

  • Hughes M2M Terminal 

  • Locking bar for padlock 

  • Mounting screws and washers 

• Accessories 

  • Basic fixed mount kit 

  • Azimuth elevation bracket 

  • Mechanical spare parts kit 

  • Extended warranty options